> Technology > Electronics > Electronic Test and Measurement
 

Electronic Test and Measurement

Results 1 - 25 of 37Sort Results By: Published Date | Title | Company Name

Accurate Statistical Analysis of SERDES Links

White Paper Published By: Mentor Graphics     Published Date: Apr 25, 2016
Over the years, two major approaches to SERDES simulation have emerged and gained popularity: time-domain (or bit-by-bit) and statistical. Both are used to build the eye diagram and bit-error ratio (BER), and each has its benefits and limitations.
Tags : 
mentor graphics, analysis flow, bit by bit, serdes, ber
    
Mentor Graphics

Automated DRC Violation Waiver Management for IP Block Integration

White Paper Published By: Mentor Graphics     Published Date: Sep 01, 2010
This paper will examine current methods used to eliminate waived errors at the chip level and describe a new automatable method for identifying and removing waived errors from DRC results.
Tags : 
mentor graphics, automated drc, violation waiver management, ip block integration, design rule checking
    
Mentor Graphics

Best Practices for Model-based Systems Engineering

White Paper Published By: IBM     Published Date: Sep 02, 2009
This webcast presents the IBM® Rational® HarmonyT for Systems Engineering process for the model-based systems development.
Tags : 
model-based systems engineering, ibm, ibm rational harmonyt, model-based systems development, uml and sysml languages
    
IBM

Calibre Pattern Matching: Picture It, Match It...Done!

White Paper Published By: Mentor Graphics     Published Date: Sep 01, 2010
This white paper discusses the conditions that have created the need for pattern matching techniques, the identification and creation of patterns, the Calibre Pattern Matching process, and the benefits derived from its use.
Tags : 
mentor graphics, calibre pattern matching, svrf, verification rules, ic design
    
Mentor Graphics

Calibre xAct 3D - No Compromise Extraction for Advanced Transistor Level Design

White Paper Published By: Mentor Graphics     Published Date: Sep 01, 2010
This paper details how the Calibre xACT 3D extraction solution addresses the extraction challenges for design signoff at advanced nodes.
Tags : 
mentor graphics, calibre xact 3d, extraction, advanced transistor level design, ic design
    
Mentor Graphics

Comparison of VHDL, Verilog and SystemVerilog

White Paper Published By: Mentor Graphics     Published Date: Sep 11, 2009
"As the number of enhancements to various Hardware Description Languages (HDLs) has increased over the past year, so too has the complexity of determining which language is best for a particular design. Many designers and organizations are contemplating whether they should switch from one HDL to another. This paper compares the technical characteristics of three, general-purpose HDLs.
Tags : 
comparison of vhdl, verilog and systemverilog, mentor graphics, hardware description languages (hdls), vhdl (ieee-std 1076)
    
Mentor Graphics

Cost Effective Software Solutions

White Paper Published By: M3 Consulting, Inc.     Published Date: Feb 03, 2011
Offshoring Is a Cost Effective Solution to Your IT Needs
Tags : 
software design, application development, web design, offshoring, it solutions
    
M3 Consulting, Inc.

DC/DC Converters for Medical Applications

White Paper Published By: Recom     Published Date: Feb 06, 2009
“Medical grade DC/DC converters” is an often used, but more often abused, description of a class of converters that are increasingly in demand. What are actually the particular requirements that medical applications place on DC/DC converters?
Tags : 
recom, dc/dc converters, medical applications, dc/dc transformer, recom datasheets
    
Recom

Developing a Complete Critical Feature Analysis Solution

White Paper Published By: Mentor Graphics     Published Date: Sep 01, 2010
What Is CFA and Why Do I Need It? This five-part paper series examines the conditions that led to the development of recommended rules, and describes the process by which automated design analysis and rule verification can help designers optimize designs to the fullest and most efficient use of area, while still ensuring manufacturability.
Tags : 
mentor graphics, critical feature analysis, cfa, design for manufacturing, dfm
    
Mentor Graphics

DTi Linear Polymer Coating Services

White Paper Published By: DTi     Published Date: Mar 09, 2011
While most coating systems address "piece parts", our linear system maximizes polymer yields, maintains consistent quality, increasing output, thereby driving down piece part costs.
Tags : 
linear polymer coating, powder coating, reel to reel, flat wire, strip metals
    
DTi

Electronic Power Systems Tradeoffs Between Single Phase and Three-Phase Power

White Paper Published By: TDI Transistor Devices     Published Date: Feb 06, 2009
Modern Electronic Systems are quite often powered from a three-phase power source. While utilizing power modules that operate directly from three-phase power might seem to provide optimal simplicity and flexibility, the added complexity required to realize three-phase power factor corrected circuitry usually negates any potential savings.
Tags : 
tdi, transistor devices, electronic power systems, single phase power, three phase power
    
TDI Transistor Devices

Equation-Based DRC: A Novel Approach to Resolving Complex Nanometer Design Issues

White Paper Published By: Mentor Graphics     Published Date: Sep 01, 2010
This paper will examine the implementation and demonstrate the benefits of eqDRC through a variety of examples comparing traditional DRC with eqDRC approaches.
Tags : 
mentor graphics, equation-based drc, nanometer design, design rule checks, drceqdrc
    
Mentor Graphics

ESC Boston 2009 Expo - largest community of designers, technologists, business leaders, and supplier

White Paper Published By: TechInsights     Published Date: Sep 01, 2009
Join us at ESC Boston, September 21-24 at the Hynes Convention Center, in Boston, MA. Expo registration is FREE, and advanced registration pricing is still available for conference packages.
Tags : 
embedded systems, conference, boston, esc boston, build your own embedded system
    
TechInsights

Establishing Confidence in PDN Simulation

White Paper Published By: Mentor Graphics     Published Date: Apr 03, 2009
A powerful signal integrity analysis tool must be flexibility, easy to use and integrated into an existing EDA framework and design flow. In addition, it is important for the tool to be accurate enough. This report reviews a validation study for the Mentor Graphics HyperLynx 8.0 PI tool to establish confidence in using it for power integrity analysis.
Tags : 
mentor graphics, pdn simulation, eda framework, mentor hyperlynx 8.0 pi, integrity analysis
    
Mentor Graphics

F-RAM vs. BBSRAM: Functional and System Design Comparisons

White Paper Published By: Ramtron     Published Date: Nov 11, 2009
Today's technological innovation demands high performance coupled with low environmental impact. These dual requirements are driving components of the semiconductor industry which informs many global businesses and consumer lives.
Tags : 
f-ram, bbsram, random access memory, ram, novram
    
Ramtron

Fluid Dynamics Simulation Keeps Aerospace Design Costs in Trim

White Paper Published By: Mentor Graphics     Published Date: Jun 04, 2010
The Mechanical Analysis Division of Mentor Graphics (formerly Flomerics) provides the world's most advanced computational fluid dynamics products. Our simulation software and consultancy services eliminate mistakes, reduce costs, and accelerate and optimize designs involving heat transfer and fluid flow before physical prototypes are built.
Tags : 
mentor graphics, fluid dynamics simulation, aerospace design, mechanical analysis, cfd
    
Mentor Graphics

How the Right Printer Can Make a Difference for Manufacturers

White Paper Published By: Intermec     Published Date: Aug 09, 2012
While production is often optimized and automated, producing the necessary documentation often is not. Creating the necessary job tickets, component IDs, and product labels for manufacturing is a growing source of waste and error. This white paper will explain how manufacturers can realize tangible improvements with proper printers and media.
Tags : 
intermec, manufacturers, printer, optimization, business intelligence
    
Intermec

How to Use Electrical Rule Checks to Identify SERDES Design Issues

White Paper Published By: Mentor Graphics     Published Date: Oct 08, 2014
This paper reports on common layout requirements related to SERDES designs, and how HyperLynx DRC can help identify issues on PCB boards that violate these requirements.
Tags : 
mentor graphics, boards, serdes, pcb boards, drc
    
Mentor Graphics

Inflexion Platform UI: A New Approach to User Interface Creation for Consumer Electronic Devices

White Paper Published By: Mentor Graphics     Published Date: Apr 03, 2009
The success of any consumer electronic device depends to a large extent on the appeal of the user interface (UI) and how easy the device is to use. Studies show that good cosmetic design can encourage users to explore the full range of features and often engenders the perception that a product is easier to use. So if the benefits of a great looking, easy-to-use UI are so clear, why are so many products still falling short of customer expectations? The solution lies in taking a fresh new approach a consumer electronic device UI plays. By identifying common UI functionality and implementing it in a reusable and customizable way, we can make it far easier for embedded engineers to deliver visually engaging and easy-to-use consumer electronic products.
Tags : 
inflexion platform ui, user interface, consumer electronic device, mentor graphics, ui functionality
    
Mentor Graphics

Intel® AtomT Pineview-based Networking Platforms

White Paper Published By: WIN Enterprises     Published Date: Jan 06, 2011
Paper provides background on Intel Atom processor for embedded market, the next-generation Atom Pineview CPUs, and platform-level solutions.
Tags : 
embedded atom processor, pineview processor, networking, firewall, network security
    
WIN Enterprises

IPV42/70 Series - Intelligent Power Distribution Units

White Paper Published By: Eaton     Published Date: Feb 06, 2009
Power distribution units (PDUs) are vital to the management of power to IT arrays and have evolved from a simple panel of switches and outlets to designs that can now be considered "intelligent" through the inclusion of internal processing capabilities.
Tags : 
eaton, power distribution units, pdus, power management, snmp communication protocols
    
Eaton

Measuring the Performance of Equalized Serial Data Links Across the Design Flow

White Paper Published By: Mentor Graphics     Published Date: Apr 03, 2009
For advanced signaling over high-loss channels, designs today are using equalization and several new measurement methods to evaluate the performance of the link. Both simulation and measurement tools support equalization and the new measurement methods, but correlation of results throughout the design flow is unclear. In this paper a high performance equalizing serial data link is measured and the performance is compared to that predicted by simulation. Then, the differences between simulation and measurements are discussed as well as methods to correlate the two.
Tags : 
mentor graphics, equalized serial data links, design flow, high loss channels, tektronix
    
Mentor Graphics

Mobility: It's all About User Expectations

White Paper Published By: Collaborative Consulting     Published Date: Dec 20, 2013
Enabling business value through the Mobile Web requires new thinking as well as a shift in technology. Putting “mobile first” and implementing services-based architectures are among the critical steps. The options are limited only to the imaginations of the designers but must be driven by the user’s context.
Tags : 
collaborative consulting, business value, user expectations, mobile web, service architecture
    
Collaborative Consulting

Optimizing Uninterruptible Power for Modern Data Processing

White Paper Published By: TDI Transistor Devices     Published Date: Feb 06, 2009
Uninterruptible Power Solutions are often solved at the facility level with unnecessarily large, inefficient, expensive and complex AC UPS systems. While this provides an easy demarcation line between the facility and end equipment, with each focusing on a different part of the problem, it also results in overall operating efficiency and total cost of ownership being difficult to ascertain and optimize.
Tags : 
tdi, transistor devices, data processing, uninterruptible power solutions, ups
    
TDI Transistor Devices

Pb-free Impact on PCB Purchasing

White Paper Published By: Nexlogic Technologies, Inc.     Published Date: Oct 21, 2010
Defining EU Directive - RoHS, WEEE Pb-Free, a basic tutorial of requirements, materials, and questions to ask EMS providers and contract manufacturers about Pb-free qualifications and costs
Tags : 
pb-free, rohs, weee, pcb design, pcb fabrication
    
Nexlogic Technologies, Inc.
Previous   1 2    Next    
Search      

Add Research

Get your company's research in the hands of targeted business professionals.